Orion-system GPC-XP Controller Uživatelský manuál stáhnout pdf (Strana 18)

Section 5: Conﬁ guring Binary Inputs

GPC-XP Controller Technical Guide

Conﬁ guring Binary Inputs

Left-click on the “ON” or “OFF” button to the right of Binary Input

#1 in the Binary Input Window (Figure 24, page 17) to open the

Binary Input Conﬁ guration Window (Figure 26 below). Each Binary

Input is separately conﬁ gured, so 8 binary input combinations are

possible in one controller.

Binary Conﬁ guration

The following conﬁ gurations are available for each Binary Input:

●

Not Used

●

N/O Contact (Close for Active) - This normally open

(N/O) input will become active when 24 VAC is applied.

●

N/C Contact (Open for Active) - This normally closed

(N/C) input will become active when 24 VAC is removed.

●

Read Global Binary - This input will read the Global

Binary on the selected channel. Click on the Question Mark

symbol for Help information. See Figure 111, page 48 in

the Appendix for the Global Binary Help Screen.

●

Push-Button Override - If a discrete Push-Button

Override switch (not on a space sensor) is wired to this

input, also select the Override Duration desired (up to

24 hours). An Override on Binary Input #1 would affect

Schedule #1. An Override on Binary Input #2 would affect

Schedule #2, etc.

●

Follow Relay - This input will be active when the selected

relay is ON.

Figure 26: Binary Input Conﬁ guration Window

Binary Input Type

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 59 60

Žádné komentáře

Orion-system GPC-XP Controller Uživatelský manuál Strana 18