Orion-system SA Controller Uživatelský manuál stáhnout pdf (Strana 30)

Zone

Installation & Wiring

SA Controller Technical Guide

12-Relay Expansion Module Overview and Wiring

Figure 25: OE358-23-12R – 12-Relay Expansion Module Wiring and Jumper Settings

12-Relay Expansion Module

Two different Expansion Modules are available for use with the SA

Controller to provide additional inputs and outputs beyond those found

on the SA Controller.

The SA Expansion Module ( OE333-23-SA) is provided with 8 Binary

Inputs, 4 Analog Inputs, 4 Relay Outputs, and 5 Analog Outputs. See

Figures 16 and 17 on page 20 and 21 for complete wiring details.

The 12-Relay Expansion Module ( OE358-23-12R) provides for 12 Dry

Contact Conﬁ gurable Relay Outputs. See Figure 25 below for complete

wiring details.

The expansion modules can be used individually or together to provide

the required inputs and outputs for your speciﬁ c applications.

When using the 12-Relay Expansion Module, you must correctly conﬁ g-

ure a set of jumpers on the board depending on whether it will be used

by itself or in addition to the SA Expansion Module.

The jumpers are located on the edge of the 12-Relay Expansion Module

on the same side of the module as the power connection. See Figure

25 below for details regarding setting the switch correctly for your

application.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 69 70

Žádné komentáře

Orion-system SA Controller Uživatelský manuál Strana 30