Orion-system VCM-X/RNE Operator Interfaces Uživatelský manuál Strana 65
- Strana / 84
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
VCM-X / RNE Operator Interfaces Technical Guide
VAV/ZONE CONTROLLER STATUS
65
Status Screen #5 - Zone Damper Position,
Airfl ow, and Desired CFM
XX Box v4.01 IDXXXX
Damper FRC: XXX %
Airflow : XXXX CFM
Desired : XXXX CFM
Line 2 Current Zone Damper Position
If you entered a FORCE command, the letters FRC
will appear. If this is normal damper operation, the
FRC will not be displayed.
Line 3 If this is a Pressure Independent box, the current
Airfl ow will be displayed. If not, this line will display
the desired damper position.
Line 4 If this is a Pressure Independent box, this line will
display the Desired CFM the box would like to
provide to the zone. If not, this line will display
[Controls to +/- 3%] to indicate how accurately the
damper will maintain the desired position.
Status Screen #6 - Fan Status & Reheat
Stages
XX Box v1.04 IDXXXX
Fan Status : OFF
Heating Relay#1 : OFF
Heating Relay#2 : OFF
Line 2 If this is a Fan Powered box, this line will display the
Fan On/Off Status. On non-fan powered boxes, this
line will display [Exp Relay 1 Not Used].
Line 3 If your VAV/Zone Controller has been confi gured to
control reheat stages, this line refl ects the On/Off
Status of the fi rst stage of Reheat. If you have 3 stages
of reheat, this line will display the total number of
active heating stages.
Examples:
“1 Reheat Stages On” or
“2 Reheat Stages On” or
“3 Reheat Stages On”
If proportional heating is used (you have no relays
confi gured for heat), this line will display
“Heating Signal: xxx %”.
Line 4 If your VAV/Zone Controller has been confi gured to
control reheat stages, this line refl ects the On/Off
Status of the second stage of Reheat. If you have 3
stages of reheat as explained on line 2, this line will be
blank.
Status Screen #7 - Alarm Status
XX Box v1.04 IDXXXX
NO ALARMS!
Line 2 Blank
Line 3 NO ALARMS!
This is displayed if no alarms are detected. If there are
one or more alarms active, the possible messages are
shown below:
SPACE SENSOR FAILURE
CFM SENSOR FAILURE
DAMPER OPENING ALARM
DAMPER CLOSING ALARM
HI SPACE TEMP ALARM
LO SPACE TEMP ALARM
DPR FEEDBACK FAILURE
Line 4 Blank
For Alarm Defi nitions, see the VCM-X Controller
Technical Guide, the VCM-X Modular E-BUS
Controller Technical Guide, or the RNE Controller
Technical Guide.
VAV/Zone Status Screens
- VCM-X / RNE Operator 1
- Interfaces Technical Guide 1
- TABLE OF CONTENTS 2
- INTRODUCTION 3
- SYSTEM CONNECTION 4
- Modular Service Tool 4
- Modular System Manager 5
- Power/Comm Board Wiring 6
- INTERFACES OVERVIEW 8
- INITIALIZATION 10
- System Manager Initialization 10
- System Manager Alarm Search 11
- System Manager Passcodes 12
- Modular Service Tool 13
- 3) Energy Saving 15
- Daylight Savings 15
- Scheduling 16
- Holiday Start/Stop Times 17
- Schedule Override 17
- VCM-X CONFIGURATION 18
- VCM-X CONFIGURATION 19
- VCM-X Confi guration Screens 19
- VCM-X Confi guration Screens 20
- Confi guration Screens 27
- RNE CONFIGURATION 28
- RNE CONFIGURATION 29
- RNE Confi guration Screens 29
- RNE Confi guration Screens 30
- Refrigerant 36
- Maximum Voltage 36
- VCM-X / RNE SETPOINTS 38
- VCM-X / RNE Setpoint Screens 39
- VCM-X / RNE STATUS 48
- VCM-X / RNE Status Screens 49
- VAV Zone Confi guration 58
- <0> if you 59
- <0> 59
- VAV/Zone Setpoint Screens 60
- VAV/ZONE CONTROLLER STATUS 64
- VAV/Zone Status Screens 64
- VAV/ZONE CONTROLLER STATUS 65
- MINILINK PD PROGRAMMING 66
- MiniLink PD Status Screens 67
- TROUBLESHOOTING 68
- VCM-X / RNE Outputs Force 69
- Setpoints.........39 73
- VAV/Zone.........63 74
- VAV/Zone.........62 74
- HVAC Schedule.........45 77
- VAV/Zone Status.........64 79
- VAV/Zone Status 80
- Zone Damper Position 82
- Manual Part No. V23670 84
Související produkty a manuály pro Hardware Orion-system VCM-X/RNE Operator Interfaces
Hardware Orion-system MHGRV II Uživatelský manuál
(12 stránky)
(12 stránky)
Hardware Orion-system MODGAS II Uživatelský manuál
(22 stránky)
(22 stránky)
Hardware Orion-system MHGRV III Uživatelský manuál
(20 stránky)
(20 stránky)
Hardware Orion-system HB Mini Uživatelský manuál
(24 stránky)
(24 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.090 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce