Orion-system PT-Link II BACnet2 Uživatelský manuál stáhnout pdf (Strana 13)

PT-Link II Interface

PT-Link II BACnet

Technical Guide

17.) At the next screen, (Figure 22), type <D> again.

15.) Once the changes are made to the text ﬁ le, click

<File> in the

upper left and then click <Save>. Now close the ﬁ le and return to

the RUINET Main Menu.

16.) From the RUINET Main Menu, type <D> to Download the new

conﬁ g.csv ﬁ le to the FieldServer (Figure 21).

Figure 21: Download new Conﬁ g.csv ﬁ le

Figure 22: Download new Conﬁ g.csv ﬁ le

NOTE: The utility will indicate when downloading is

complete. DO NOT reset the PT-Link until this mes-

sage is displayed, as this will corrupt the PT-Link.

NOTE: The Remote Filename option must always be named

“conﬁ g.csv” for conﬁ gurations; otherwise, it will be

ignored by the PT-Link.

18.) Once the download is complete, restart the PT-Link II by

cycling power or press <Esc> to get back to the RUINET Main Menu

and then type <!> option to save the new conﬁ guration ﬁ le and restart

RUINET. It is possible to do multiple downloads to the PT-Link II

before resetting it. There will be a start-up period where you will be

unable to connect to the PT Link.

19.) From the RUINET Main Menu, type <A> for the Data Array

Overview. The Data Array Overview Screen will display (Figure 23).

Verifying PT-Link Communications

Figure 23: Data Array Overview Screen

20.) This screen (Figure 23) will verify communication to the HVAC

units. Lines 1 & 2 should always be present. After a start-up period

of approximately 4 minutes, you will see 1 additional line for each

HVAC unit. This screen represents the PT Link II communicating

with 1 HVAC unit.

21.) Once these steps have been completed and you have veriﬁ ed

that the reconﬁ gured PT Link II has established communication to the

HVAC unit(s), it can now be added to the BAS network.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 59 60

Žádné komentáře

Orion-system PT-Link II BACnet2 Uživatelský manuál Strana 13