Orion-system VCC-X Controller Uživatelský manuál stáhnout pdf (Strana 55)

VCC-X Operator Interface SD

VCC-X STATUS

VCC-X Status Screens

Status Screens - General Procedures

From any menu screen, press <STATUS>. The Unit Selection Screen,

shown below,

will appear requesting that you enter the unit ID number.

Enter Unit Address

Then Press Enter

Selected Unit #_1

Press Down

Enter the correct unit ID number of the Controller you want to view

and

press <ENTER>. Once communication is established, the *00*

message will go away. Then

press <>. You will then see the Status

Selection Screen(s) below:

VCC-X Status

RSM #1

RSM #2

Select & Press Enter

RSM #3

RSM #4

Select & Press Enter

Select VCC-X Status. Then press <ENTER>.

The ﬁ rst Status Screen will appear. Press <> to scroll through

the screens.

NOTE: If the *00* remains, it indicates a communication

failure to the controller.

Status Screen #1 - Date and Time

VCC-X v1.02 ID #

Controller Date/Time

01/16/2015 05:00 PM

Line 2 Controller Date/Time

Line 3 MM/DD/YYYY HH:MM XX

(Month, Day, Year) (Hour, Minutes, AM or PM)

Status Screen #2 - Application Type, Schedule

Mode & HVAC Mode

VCC-X v1.02 ID #

App Type

Schedule Mode

HVAC Mode

Line 2 App Type:

Constant Volume Single Zone VAV

VAV VAV w/Tempering

Make Up Air Space w/High OA%

Line 3 Schedule Mode:

Unoccupied Holiday Occupied

Occupied Forced Occupied

Override Forced Unoccupied

Holiday Unoccupied Remote Occupied

Line 4 HVAC Mode:

Off Dehum Vent

Vent Mode Dehum Cool

Cool Mode Dehum Heat

Heat Mode Warm Up

Defrost Cool Down

Remote Cool Remote Heat

Remote Vent RH Remote Cool RH

Remote Heat RH

Status Screen #3 - Controlling Temperature,

Cooling & Heating Setpoints

VCC-X v1.02 ID #

Ctrl Temp: 000.0ºF

Cool Spt: 000.0ºF

Heat Spt: 00.0ºF

Line 2 Controlling Temperature

This is the temperature of the sensor that is conﬁ gured as

the HVAC Source (Mode Enable) Sensor. This can be

the Supply Air, Return Air, Outdoor Air, or Space

Temperature Sensor.

Line 3 Cooling Setpoint

Based on the current Occupied/Unoccupied Mode

of operation. (Reﬂ ects any active resets.)

Line 4 Heating Setpoint

Based on the current Occupied/Unoccupied Mode

of operation. (Reﬂ ects any active resets.)

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 95 96

Komentáře k této Příručce

Žádné komentáře

Orion-system VCC-X Controller Uživatelský manuál Strana 55

Komentáře k této Příručce

Související produkty a manuály pro Hardware Orion-system VCC-X Controller