Orion-system Lead Controller Uživatelský manuál Strana 16
- Strana / 56
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Section 4: Confi guring Analog Inputs
Lead/Lag Controller Technical Guide
16
Calibrate, Override, and Clear Sensor
Override
Once confi gured, all readings can be overridden to specifi c values
for test purposes. Additionally, all thermistor sensors can also be
calibrated by entering positive or negative offsets to be applied to
the current readings.
Right-click in the data entry fi eld in the Analog Inputs Window to
open the Calibrate, Override, and Clear Sensor Override Pop-Up
Menu shown in Figure 17 and select the desired function.
Figure 17: Calibrate and Override Sensor
Figure 18: Data Entry Field
Calibrate, Override, and Clear Sensor Override
If you select Calibrate Sensor or Override Reading, the data entry
window as shown by Figure 18 will open. Left-click in the yellow
text fi eld, type in the desired value, and press <ENTER> to save.
●
Calibrate Sensor: Type a positive or negative offset that
will be applied to the current reading and press
<ENTER>
to save. NOTE: The reading Offset can be from -100° to +
100°. This function only applies to Thermistor Temperature
Sensors.
●
Override Reading: Type a value that will override the
actual sensor reading and press <ENTER> to save.
●
Clear Sensor Override: Select to clear a sensor override
that was entered.
- Lead/Lag Controller 1
- Technical Guide 1
- Table of Contents 2
- Lead/Lag Controller Overview 3
- Step-By-Step Guide 4
- Step-By-Step Guide 4
- Dimensions and Mounting 5
- Installation & Wiring 6
- Communication Settings 7
- Operator 9
- Interface 9
- Naming Lead/Lag Controllers 10
- Lead/Lag Status Screen 11
- 2 Lead / 1 Lag Status Screen 12
- Analog Inputs 13
- Confi guring Analog Inputs 14
- User Scaling 15
- Sensor Reading Appendix 15
- Sensor Scaling 15
- Override 16
- Components and Navigation 17
- Confi guring Binary Inputs 18
- Override 18
- Main Control Method 20
- Timers 20
- Relay Output Type 20
- Lead/Lag Proof Setpoint Help 20
- Control Method 22
- Timers 24
- Figure 36: Timers Window 24
- Control Type Field 26
- PID Control 27
- Control Source 28
- Setpoint Reset Source 28
- Disabled Mode Offsets 28
- Outdoor Air Enable 29
- Controlling Schedule 29
- Enabling Relay 29
- Enabling Binary Input 29
- Output Voltage Limits 29
- Alternate Override 30
- Outdoor Status 31
- Section 9: Setting Schedules 32
- Schedules Window 33
- Setting Holidays 35
- Schedule Override 35
- Confi guring Alarms 36
- Reset Factory Defaults 37
- Saving Lead/Lag Setpoints 37
- Restore From File 38
- Printing Daily Status Reports 39
- Status Report Example 40
- Relay Confi guration 42
- Binary Input Confi guration 44
- Roof Top Units 45
- Figures 87 & 88 47
- USB Driver Installation 48
- Changing the COM Port Number 49
- Operator Inter 54
- Notes 55
Související produkty a manuály pro Hardware Orion-system Lead Controller
Hardware Orion-system VCM Uživatelský manuál
(52 stránky)
(52 stránky)
Hardware Orion-system PT-Link-LON Uživatelský manuál
(40 stránky)
(40 stránky)
Hardware Orion-system MHGRV-X Uživatelský manuál
(26 stránky)
(26 stránky)
Hardware Orion-system MODGAS-XWR Uživatelský manuál
(28 stránky)
(28 stránky)
Hardware Orion-system MODGAS-X Uživatelský manuál
(28 stránky)
(28 stránky)
Hardware Orion-system PREHEAT-X Uživatelský manuál
(28 stránky)
(28 stránky)
Allen-Bradley 1770-M12 manuales
Manuales del propietario y guías del usuario para No Allen-Bradley 1770-M12.
Ofrecemos 2 manuales en pdf Allen-Bradley 1770-M12 para descargar gratis por tipos de documentos: Especificaciones
Komentáře k této Příručce